KR-610 Scale Inhibitor is composed of organophosphines acid, polycarboxylic acid and sulfosalt copolymers. KR-610 Scale Inhibitor has properties of chelation and dispersion, has good synergistic effect and can bring about crystal distortion. The particles are dispersed in water system and are removed later, through which the dusty water system can be operated normally.
| Parameter | Standard |
|---|---|
| Appearance | Amber transparent liquid |
| Solid content, % | 40.0 min |
| Total phosphoric acid,(as PO43-), % | 25.0 min |
| pH(1% water solution) | 2.0±0.5 |
| Density (20℃), g/cm3 | 1.20 min |
Add KR-610 Scale Inhibitor into plastic pool (or box) every day, dilute with water and continuously add into inlet of dosage pump or metering valve (outlet of collecting tank). The dosage of 3.0-10.0 ppm is preferred.
| 25L Drum | 200L Drum | 1000L IBC | ISO Tank | ||
 |
 |
 |
 |
||
| Storage for 10 months in shady room and dry place. | |||||
| Hazard Information | Satety Precaution |
|---|---|
|
Not regulated |
|
| Acid, avoid contact with eye and skin, once contacted, flush with plenty of clean water. | |
