KR-1010 Acrylic Homopolymer is a low molecular weight polyacrylate with a molecular weight around 2000.
KR-1010 Acrylic Homopolymer is effective to inhibit precipitation of calcium carbonate, calcium oxalate, calcium sulfate, barium sulfate, and other low solubility salts, shows good anti-scaling efficiency at low dosage over a wide range of pH, water hardness and temperature conditions.
Compared with other higher molecular weight homopolymers, KR-1010 Acrylic Homopolymer has a higher degree of solubility in presence of Ca2+.
| Parameter | Standard |
|---|---|
| Appearance | Colorless to pale yellow transparent liquid |
| Solid content, % | 43.0 min |
| Density (20℃), g/cm3 | 1.20 min |
| pH (as is) | 6.0 - 8.0 |
| Viscosity(25℃), cps | 100 - 300 |
Scale inhibition in open recirculating cooling circuits (especially for CaCO3 scale), dispersant for boiler sludge control.
Oil field water treatment for preventing scale in both formation and production equipment.The dosage of 10-30mg/L is preferred when use alone.
| 25kg Bag | 200L Drum | 1000L IBC | ISO Tank | ||
 |
 |
 |
 |
||
| Storage for 10 months in shady room and dry place. | |||||
| Hazard Information | Satety Precaution |
|---|---|
|
Not regulated |
|
| Once contacted with eye and skin, flush with plenty of clean water. | |
